Creating a Shortcut on a FrameReady Guest Computer

Note: Make sure that FrameReady is open and set to Multi-user on the Host computer. How to Create a Shortcut on a FrameReady Guest Computer Open FileMaker Pro on the guest computer, either from the Desktop shortcut or under All Programs in the Start menu (Windows

Tags:    

Networking Setup Overview

Networking FrameReady to two or more devices (computer or iPad) is accomplished by setting up a LAN (local area network) and installing FileMaker Pro (FMP) on each computer and FileMaker Go on each iPad. Getting Started If you are unsure of

Tags:    

Setting up FrameReady for Multi-User

Although FileMaker Pro comes “bundled” with FrameReady, a separate license must be purchased from SoftTouch Solutions for each additional device on which FMP is installed. Please call 1-888-281-3303. How to set up FrameReady for Multi-User On the Host computer open FrameReady by double-clicking on

Tags:    

Setting up FrameReady on Your Network

Important: DO NOT install FrameReady on any computer other than the Host computer. How to set up FrameReady on your Network The default protocol for networking is TCP/IP. It is recommended that each computer be assigned a static IP address.

Tags:  

Shared Files Overview

The FileMaker platform allows you to safely share your FileMaker information with Windows, Mac and iPad users. FrameReady information is stored in FileMaker files. Those files, in order to be shared, must be stored on a Host computer. The Host

Tags:          

Networking Guidelines

Important Guidelines for using FrameReady on a Network Install all of the FrameReady files on the hard disk of your fastest computer. This will be the Host computer. Always open FrameReady on the Host computer first. All FrameReady files remain located on

Tags:    

Adding a Host as a Favorite

Note: Make sure that FrameReady is open and set to Multi-user on the host computer.

Tags:    

Cannot Find Host on Guest Computer

Instead of loading FrameReady from the Host computer, FileMaker cannot find the Host. Check that an active Firewall is not blocking FileMaker Pro. See: How to Add Firewall Exceptions

Tags:              

Modifying FrameReady on a Network

A variety of modifications can be made from specific computers.

Tags:        

Setting up a Multi Site Network

Important: A multi site configuration requires the use of two servers. How to Set Up a Multi Site Network The FrameReady Multi Site configuration requires the use of two servers: Server One: The first server has FileMaker Server installed along

Tags:        

Setting up Default Settings on a Network

If you are operating FrameReady on a network, the default settings must be set up on the Host, otherwise they will revert back to their original setting when you shut down.

Tags: